bude si to treba vyrobit - tj. kupit ten 6-pin konektor (nieje to taky ako pre napajanie grafik v pc - inak ulozene zamky) -
http://www.tme.eu/sk/details/1586765-6/signalove-konektory-raster-420mm/te-connectivity/,
+ piny -
http://www.tme.eu/sk/details/1586315-1/signalove-konektory-raster-420mm/te-connectivity/,
+ nejaky ten vodic
- zapajkovat do kazdeho pinu oblankovany a nastrihany vodic na potrebnu dlzku, vsunut piny do plastoveho konektora, zapojit podla navodu nizsie.
alebo kupit toto a prerobit si zapojenie podla seba
http://www.ebay.com/itm/FUSION-EN-AT110-EN-AB1120-ACTIVE-SUBWOOFER-SUB-6-PIN-WIRE-POWER-PLUG-CABLE-LEAD-/401289305147?hash=item5d6eb4dc3b:g:m1EAAOSw3v5YoieqI emailed audiovox, here's the pinout:
(There are different versions of the ba-200, so I'm assuming they al
use the same wiring/pinout...)
if you look at the amp on the enclosure(right-side up... so the writin
goes left->right):
The top left pin is #1, beside it is #2, then #3.
The bottom left pin is #4, beside it is #5, then #6.
#1 Right speaker positive input
#2 Empty
#3 12 Volt Constant Power
#4 Left speaker positive input
#5 Remote turn on / Acc power input
#6 Ground
Now there's supposed to be a 15-amp fuse on pin #3 (12v constan
power).
Choď na stránku: