VIA P4X400/8235 Chipset > Novy procesor

filipqo · Napísal **filipqo**: 13.06.2007 17:41

Mam tuto maticnu dosku :

Kód:

Socket 478, 533/400FSB
VIA P4X400/8235 Chipset
Slots: AGP 8X, 5x PCI
USB2.0, DDR333, LAN, ATA133
AC'97, ATX Form Factor

Chipset:
VIA P4X400 Northbridge / VIA VT8235 Southbridge
System clock: 400/533MHz 
CPU-Support
Sockel 478 support
Intel Pentium 4 and Celeron processors with 400 and 533MHz FSB 
Expansion Slots:
1 x AGP (v3.0) slot supports 8X mode
Important note: AGP-slot only supports 1,5V-mode
5 x 32 Bit PCI (v2.2) 
Onboard IDE Controller
2-Channel Enhanced PCI IDE up to 4 IDE devices
supports UltraDMA/133 (ATA133) 
Multimedia:
AC97 2.1 Stereo Sound
Connectors on the backpanel: line-in, line-out, microphone, MIDI/gameport
More line-ins on the mainboard, audio-in for CD-ROM and AUX. 
Networking:
10/100MBit LAN
VIA VT6103 
Backpanel-connectors:
1 x PS/2-Mouse
1 x PS/2-Keyboard
1 x Parallel (SSP/EPP/ECP)
1 x Serial
1 x LAN (RJ45)
2 x USB 2.0 (4 more onboard)
Audio: line-in, line-out, microphone, MIDI/gameport 
Onboard-connectors:
1 x Floppy drive (up to 2,88 MB)
4 x USB 2.0 (two more on the backpanel)
2 x Audio frontpanel-connectors (microphone and line-out)
2 x CD-ROM Audio-in
1 x Audio-AUX
3 x Fan (CPU, AGP, Case) 
Memory:
3 x 184-pin for PC1600 (DDR200), PC2100 (DDR266) and PC2700 (DDR333) and unbuffered DDR SDRAM memory
with 100, 133 resp. 166 clock frequency up to a total capacity of 3GB
AV49VN also supports PC3200 (DDR400) memory with 200MHz clock frequency in overclocking mode. 
Hardware-monitoring
CPU-temperature, system voltage and fan revolution 
Power Management
ACPI Version 1.0 (Advanced Configuration and Power Interface)
On/Off-button with two functions: Suspend-Sparmodus / soft-off
Automatic power on after power failure 
BIOS
Award V6.0PG PnP Green BIOS
stored in 4MBit LPC Flash-memory chip 
ATX-power supply connector
Standard 20-Pin-ATX-power supply and additional 4-pin 12V-connector 
Delivery Content
Mainboard, detailed manual (83 pages), backpanel-bracket, ATA133- and Floppy-cable, bracket-adapter with bass/center-audio-connectors, driver CD-ROM 
Form Factor
ATX: 30,5 x 24,4 cm 

Na toto uz v obchode procesor nekupim vsakze ?

Jaro · Napísal **Jaro**: 13.06.2007 17:43

ee jedine bazar

filipqo · Napísal autor témy **filipqo**: 13.06.2007 17:59

hm no a z bazaru radsej nekupim lebo si ho tam dam a mi po tyzdni vyhori tak mozem tam hodit naspet ten celeron ak vobec este bude maticna doska dobra :\ Radsej si uz pockam na novy PC ... Ale keby som mal namiesto toho celeronu pentium 4 2.4 tak to by mi PC fical ako raketa a ne ako teraz

skoda no uz ,,, mal som kupit skor ... pred 2 rokmi

Dik

filipqo · Napísal autor témy **filipqo**: 13.06.2007 19:55

Takze mam teoreticky zhanat pentium 4 na socket 478 s 400 a 533MHz FSB a malo by to ist ?

Jaro · Napísal **Jaro**: 13.06.2007 19:56

jj ale mrkni este manual koli vynimkam

Shit · Napísal **Shit**: 15.06.2007 23:17

filipqo píše:

...

Na upgrade bych se vykašlal... Z "veterána" moderní PC stejně neuděláš.... Jenom vyhodíš prachy za dalšího "veterána".

filipqo · Napísal autor témy **filipqo**: 16.06.2007 13:20

ale aspon to pojde trosku rychlejsie a za tu tisicku za novy procak sa to opalati lebo ho budem pouzivat este pol roka

a taky INTEL P4 by mi to tu dost zrychlil .

eXistenZ · Napísal **eXistenZ**: 16.06.2007 13:25

filipqo píše:

ale aspon to pojde trosku rychlejsie a za tu tisicku za novy procak sa to opalati lebo ho budem pouzivat este pol roka

a taky INTEL P4 by mi to tu dost zrychlil .

ani nie

filipqo · Napísal autor témy **filipqo**: 11.07.2007 10:14

Takze keby som si kupil procesor :

Kód:

Intel Pentium4 2, 8 Ghz, 533FSB, 512Kb, jadro Northwood, socket 478

Tak by mi to nezryhlilo PC ?

Carlos · Napísal **Carlos**: 12.07.2007 15:21

Tak urcite to Pentium je lepsie ako ten Celeron co tam mas....ale dajake ocividne zvysenie rychlosti PC necakaj. Snad by sa oplatila taka vymena keby si ho dakde zohnal za smiesnu cenu.

VIA P4X400/8235 Chipset > Novy procesor

Podobné témy