Rychly Linux

mirom · Napísal **mirom**: 01.05.2010 10:38

Caute. Potreboval by som zistit, ktora distribucia je zaroven rychla a jednoducha. Skusenosti s Linuxom nejake mam ale nic extra takze by som chcel nieco co netreba nejako krkolomne nastavovat atd. Taktiez neviem ci KDE/GNOME aky je tam rozdiel? Pojde to na dost pomaly PC je tam celeron 1.6GHz a 256MB RAM a XP tam ide fakt pekelne pomaly. Uvazoval som nad najnovism Ubuntu 10.04 co mi poradite?

Semp · Napísal **Semp**: 01.05.2010 10:58

skorej si daj Debian

mirom · Napísal autor témy **mirom**: 01.05.2010 11:02

OK a je aspon tak user friendly ako Ubuntu? Lebo to sa mi zdalo byt v pohode co sa ovladania tyka. Ale zas na druhu stranu si to neviem porovnat lebo som iny ani neskusal. Takze Debian bude rychlejsi ako Ubuntu?

Semp · Napísal **Semp**: 01.05.2010 11:11

Debian bude rychlejsi a ked Ubuntu tak by som volil starsiu veriu napriklad 8.10

Ďuri · Napísal **Ďuri**: 01.05.2010 11:26

Sempron
Netrep. Novsie verzie nie su hardverovo narocnejsie ako starsie, navyse 8.10 uz nie je podporovana.
mirom
Debian je viac-menej dobra volba (s grafickym prostredim napr. LXDE), ale uplny zaciatocnik bude musiet dost googlit. Ubuntu s GNOME nepojde najsviznejsie (povedzme, ze bude pouzitelne), ale aspon sa s tym zoznamis.

mirom · Napísal autor témy **mirom**: 01.05.2010 11:37

To graficke prostredie LXDE tam preba potom doinstalovat alebo ako? Tiez sa chcem spytat odkial to stiahnut lebo jedine schopne co som nasiel bolo toto http://www.debian.org/CD/ a aj tam je "300" veci. Chcem jednoducho stiahnut ISO, vypalit boot CD a nainstalovat tak co z toho mam zlvolit to male CD je co? moc tam tomu nerozumiem. Alebo potom este toto ale neviem co z toho stiahnut http://cdimage.debian.org/debian-cd/5.0.4/i386/iso-dvd/

Ďuri · Napísal **Ďuri**: 01.05.2010 12:29

Toto je odkaz na Debian Lenny s grafickymi prostrediami Xfce a LXDE, staci ti stiahnut iso jedneho CD, ostatne netreba. Neskusal som to, takze neviem, ale zrejme sa bude dat zvolit, ktore chces. Inak upozornujem, ze v Debiane (hlavne vetva "stable") je trosku starsi softver, napr. Firefox vo verzii 3.0.

mirom · Napísal autor témy **mirom**: 01.05.2010 12:32

Dakujem. A ten firefox aj tak nepotrebujem nainstalujem tam Chrome teda ak tam pojde ale na Ubuntu siel.

remus · Napísal **remus**: 03.05.2010 16:10

Ja ti mozem odporucit XUBUNTU.
Mam 2GHZ, 512 RAM, len 6MB grafika a system bezi krasne svizne !
Proste ked enstahujem alebo tak, disk vobec nepocut, netoci...
Krasny svizny system

))
Odporucam
www.xubuntu.com

mirom · Napísal autor témy **mirom**: 05.05.2010 16:29

No nainstaloval som Debian a uz to tak vidim, ze preinstalujem na Ubuntu alebo to XUbuntu. Debian je sice rychly to uznavam ale asi ozeliem trohu rychlosti ved ten Debian mi pride az ANTIuser friendly. Ani debilny Chrome som nevedel nainstalovat, je neprehladny a premna dost zlozity a nechce sa mi pri hoci akej blbosti co budem chiet robit na PC hladat hodinu na nete rozne navody a vypisovat prikazy pre konzolu, je to skoda lebo je naozaj dost rychly

ale Ubuntu je IMHO daleko viacej user friendly ako toto.

yaJohny · Napísal **yaJohny**: 05.05.2010 17:11

Debian je presny taky friendly, ako Ubuntu a ostatne distra

mirom · Napísal autor témy **mirom**: 05.05.2010 17:23

To vypada uz inac. Len skoda, ze netusim ako take cosi dosiahnut. AK by mi niekto pomohol na zaciatok tak teda ako nainstalujem Chrome a dostanem niekde na panel ukazovatel stavu baterie NB? Dalej nejake zakladne app. ako nahrada za winrar, QIP a nejaky dobry prehravac na hudbu aj ostatne media.

yaJohny · Napísal **yaJohny**: 05.05.2010 17:37

Chrome: http://www.google.com/chrome/eula.html? ... _medium=ha

Bateria: nemas bateriu v paneli uz? klikni pravym tlacidlom na panel, - pridat do panelu - Sledovanie stavu bateria napajania
ak nemas, tak system - predvolby - sprava napajania

Winrar: otvor konzolu a napis
sudo aptitude install file-roller rar unrar

Qip - na to odporucam Pidgin
sudo aptitude install pidgin

na hudbu audacious, alebo rhythmbox

mirom · Napísal autor témy **mirom**: 05.05.2010 17:59

Zadam prikaz a napise "miro is not in the sudoers file. This invident will be reported." A ten chrome som uz stiahol aj predtym no neviem ako to nainstalovat, dalej mam problem ten, ze ked nieco stiahnem tak a dam to uloziit na plochu (zatial som inam neskusal) tak sa mi subor zobrazi az po restarte. A este som googlil a zistil som, ze ten instalacny balik v akom je zbaleny aj chrome by sa mal dat odvorit cez Synaptic Package Manager len to tiez neviem kde stiahnut a ako nainstalovat.

//este ma napadlo, ze ked vypinam book tak mam moznost len odhlasit a az potom vypnem tak, ze ci sa neda vypnut/restartovat rovno bez odhlasenia..

Ďuri · Napísal **Ďuri**: 05.05.2010 18:31

mirom
Rychly akozefix - pomocou prikazu su sa prepnes na pouzivatela root (musis zadat heslo pre roota, ktore si vymyslal pri instalacii), potom mozes pouzivat taketo prikazy bez toho, aby si pouzival sudo. Takto nejako to bude vyzerat:

Kód:

$ su
Password: 
# aptitude install nazovbalika

Aby sme ale tvoj problem vyriesili, mozes sem poslat vypis prikazu

Kód:

cat /etc/sudoers

? (musis byt prepnuty na roota pomocou su)
Ked si stiahol deb balik s Google Chrome, otvoris ho dvojklikom a kliknes na tlacitko Instalovat balik. Vypyta od teba heslo, ktore ti zrejme fungovat nebude

z toho isteho dovodu ako vyssie.
Synaptic by si mal mat uz nainstalovany, skus Alt+F2 -> napis synaptic.
Inak drzim palce, skus vydrzat pri tom Debiane, tych par problemov rychlo vyriesime.

mirom · Napísal autor témy **mirom**: 05.05.2010 19:09

Dakujem za pomoc sam by som bol asi strateny

No ked mam ten instalator chrome-u ulozeny na ploche tak ako to nainstalujem? Dalej sa chcem spytat ci je niekde nejaky prehlad nainstalovanych aplikaci odkial by sa to dalo spustat pripadne vytvorit odkaz na plochu. Synaptic asi nemam napisalo to, ze sa nenaslo. Pidgin mi uz ide a rar nemam ako vyskusat lebo neviem kde ho najst a ako ho zapnut. A este keby si vedel ku tomu problemu s vypinanim...

yaJohny · Napísal **yaJohny**: 05.05.2010 19:28

omg ja som myslel, ze mas Ubuntu

cize odznova

konzola:

Kód:

#su
zadas heslo

#visudo

tam si najdi 
# User privilege specification
root    ALL=(ALL) ALL
a dopln pod to to iste, len namiesto root daj svoj nick:
cize napr: pokemon   ALL=(ALL) ALL

ulozis to CTRL+X a potvrdis Y
exit a ENTER

teraz mozes pouzivat sudo

sudo aptitude install gdebi-gtk
potom poklikas na balik chrome a nainstaluje sa

ak to nepojde:
potom konzola
cd Desktop
sudo dpkg -i nazov_baliku_chrome
nazov baliku nemusis pisat cely staci prve 2-3 pismena a potom stlac TAB

Vsetky nainstalovane aplikacie mas v menu vlavo hore, je tam aj Synaptic
System, - sprava -spravca balikov synaptic

mirom · Napísal autor témy **mirom**: 05.05.2010 19:50

Dik. No neviem cim zacat mam toho tolko..nainstaloval som nejaky prehliadac obrazkov"gwenview" ale neviem ako ho spustit, chcel som si zmenit pozadie tak som stiahol obrazok a otvoril cez spravcu preberania lebo sa mi asi zas zobrazi az po restarte

no a dalo ze vybrat aplikaciu v ktorej to otvorit a nebola tam ziadna ale len plocha. Akurat mi konzola zamrla, neda sa donej pisat ani ju zavriet. Idem to restartnut ale zas sa musim najskor odhlasit aj to ma dost serie. Kdesi som cital, ze je aj Winamp pre Linux to by bolo skvele.Dalej potrebudej vediet kde najdem nainstalovane aplikacie. Dalej ked instalujem cosi cez tu konzolu tak to potrebuje instalacne CD debianu (je to notebook to ho mam vsade nosit zo sebou alebo co?). Dalsi problem je mi nejde zvuk na videach a ani obraz (myslim na youtube, inde som neskusal) tak neviem ci treba nejaky specialny drivery pre linux btw book je HP Compaq NX6110 tak potrebujem ovladace asi nan.

Napisal som toho pomerne vela co potrebujem vediet a este toho bude tak prisim majte somnou trpezlivost

A tiez sorry, ze je to pisane trocha chaoticky...

// pozadie sa mi podarilo zmenit po odhlaseni a prihlaseni sa objavil na ploche a este sa mi aj doplnil akysi prehliadac a zmenila ikona vypinania netusim preco

// to na ten chrome. to prve neslo tak som dal to druhe a asi to nainstalovalo ale ako to spustim resp. odkial? A vlavo hore ziadne menu nieje su tam len plochy...

yaJohny · Napísal **yaJohny**: 05.05.2010 21:17

1. vloz sem vypis z prikazu lspci a dmesg

2. sudo nano /etc/apt/sources.list
a pred deb cdrom:[Debian GNU/Linux atd. vlozis toto #
ulozis CTRL+X a potom:
sudo aptitude update
sudo aptitude safe-upgrade

3. sudo aptitude install flashplugin-nonfree module-assistant build-essential linux-headers-$(uname -r) mc checkinstall moc conky make audacious

4. zvuk si zvys hlasitost vpravo hore popripade v konzole napis alsamixer

5. linux je v tomto genialny, ze v podstate az ked nenahodis novsi kernel, nemusis restartovat

takze restartovat urcite nemusis po kazdej aplikacii.

6. aplikacie sa ti instaluju do /usr/bin

mirom · Napísal autor témy **mirom**: 05.05.2010 21:41

dmesg:

Kód:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21lenny4) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Tue Mar 9 17:35:51 UTC 2010
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000000f7d0000 (usable)
[    0.000000]  BIOS-e820: 000000000f7d0000 - 000000000f7efc00 (reserved)
[    0.000000]  BIOS-e820: 000000000f7efc00 - 000000000f7fb000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000000f7fb000 - 000000000f800000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 247MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 63440) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->    63440
[    0.000000]   HighMem     63440 ->    63440
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->    63440
[    0.000000] On node 0 totalpages: 63440
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 464 pages used for memmap
[    0.000000]   Normal zone: 58880 pages, LIFO batch:15
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP 000FE270, 0014 (r0 HP    )
[    0.000000] ACPI: RSDT 0F7EFC84, 0030 (r1 HP     099C     21110520 HP          1)
[    0.000000] ACPI: FACP 0F7EFC00, 0084 (r2 HP     099C            2 HP          1)
[    0.000000] ACPI: DSDT 0F7EFD4C, 7D58 (r1 HP       DAU00     10000 MSFT  100000E)
[    0.000000] ACPI: FACS 0F7FAE80, 0040
[    0.000000] ACPI: APIC 0F7EFCB4, 005A (r1 HP     099C            1 HP          1)
[    0.000000] ACPI: MCFG 0F7EFD10, 003C (r1 HP     099C            1 HP          1)
[    0.000000] ACPI: DMI detected: Hewlett-Packard
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfec01000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 10000000 (gap: 0f800000:d0800000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 37992 bytes of per cpu data
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 62944
[    0.000000] Kernel command line: root=/dev/hda2 ro 
[    0.000000] mapped APIC to ffffb000 (fec01000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[    0.000000] Detected 1496.276 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.004000] Memory: 241604k/253760k available (1771k kernel code, 11556k reserved, 750k data, 244k init, 0k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.004000]     vmalloc : 0xd0000000 - 0xff7fe000   ( 759 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xcf7d0000   ( 247 MB)
[    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB)
[    0.004000]       .data : 0xc02bac75 - 0xc0376620   ( 750 kB)
[    0.004000]       .text : 0xc0100000 - 0xc02bac75   (1771 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.084120] Calibrating delay using timer specific routine.. 2996.38 BogoMIPS (lpj=5992778)
[    0.084295] Security Framework initialized
[    0.084366] SELinux:  Disabled at boot.
[    0.084432] Capability LSM initialized
[    0.084512] Mount-cache hash table entries: 512
[    0.084750] Initializing cgroup subsys ns
[    0.084819] Initializing cgroup subsys cpuacct
[    0.084886] Initializing cgroup subsys devices
[    0.084972] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.085074] CPU: L2 cache: 1024K
[    0.085139] Intel machine check architecture supported.
[    0.085211] Intel machine check reporting enabled on CPU#0.
[    0.085293] Checking 'hlt' instruction... OK.
[    0.100563] SMP alternatives: switching to UP code
[    0.106860] Freeing SMP alternatives: 16k freed
[    0.106928] ACPI: Core revision 20080321
[    0.128008] ENABLING IO-APIC IRQs
[    0.128008] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.167791] CPU0: Intel(R) Celeron(R) M processor         1.50GHz stepping 08
[    0.168010] Brought up 1 CPUs
[    0.168010] Total of 1 processors activated (2996.38 BogoMIPS).
[    0.168010] CPU0 attaching sched-domain:
[    0.168010]  domain 0: span 0
[    0.168010]   groups: 0
[    0.168010] net_namespace: 660 bytes
[    0.168010] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[    0.168010] Booting paravirtualized kernel on bare hardware
[    0.168010] NET: Registered protocol family 16
[    0.168010] ACPI: bus type pci registered
[    0.168010] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.168010] PCI: MCFG area at e0000000 reserved in E820
[    0.168010] PCI: Using MMCONFIG for extended config space
[    0.168010] PCI: Using configuration type 1 for base access
[    0.168010] Setting up standard PCI resources
[    0.168885] ACPI: EC: Look up EC in DSDT
[    0.171917] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.223305] ACPI: Interpreter enabled
[    0.223371] ACPI: (supports S0 S3 S4 S5)
[    0.223584] ACPI: Using IOAPIC for interrupt routing
[    0.234462] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.234538] ACPI: EC: driver started in interrupt mode
[    0.234677] ACPI: PCI Root Bridge [C002] (0000:00)
[    0.235555] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.235565] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.235663] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
[    0.236014] PCI: Transparent bridge - 0000:00:1e.0
[    0.236014] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
[    0.236461] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C068._PRT]
[    0.271530] ACPI: PCI Interrupt Link [C0D8] (IRQs 10 *11)
[    0.272008] ACPI: PCI Interrupt Link [C0D9] (IRQs *10 11)
[    0.272491] ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
[    0.272966] ACPI: PCI Interrupt Link [C0DB] (IRQs *10 11)
[    0.273439] ACPI: PCI Interrupt Link [C0EE] (IRQs *10 11)
[    0.273903] ACPI: PCI Interrupt Link [C0EF] (IRQs 10 11) *0, disabled.
[    0.274452] ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11)
[    0.274913] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled.
[    0.275412] ACPI: Power Resource [C1C5] (on)
[    0.275614] ACPI: Power Resource [C244] (off)
[    0.275797] ACPI: Power Resource [C245] (off)
[    0.275977] ACPI: Power Resource [C246] (off)
[    0.276164] ACPI: Power Resource [C247] (off)
[    0.276316] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.276423] pnp: PnP ACPI init
[    0.276490] ACPI: bus type pnp registered
[    0.287585] pnp: PnP ACPI: found 11 devices
[    0.287652] ACPI: ACPI bus type pnp unregistered
[    0.287721] PnPBIOS: Disabled by ACPI PNP
[    0.288079] PCI: Using ACPI for IRQ routing
[    0.288450] hpet clockevent registered
[    0.288458] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.288659] hpet0: 3 64-bit timers, 14318180 Hz
[    0.289784] ACPI: RTC can wake from S4
[    0.289878] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.289953] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[    0.290026] system 00:00: iomem range 0x100000-0xf7fffff could not be reserved
[    0.290129] system 00:08: ioport range 0x500-0x57f has been reserved
[    0.290203] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[    0.290298] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.290396] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[    0.290469] system 00:09: ioport range 0x1000-0x107f has been reserved
[    0.290542] system 00:09: ioport range 0x1100-0x113f has been reserved
[    0.290614] system 00:09: ioport range 0x1200-0x121f has been reserved
[    0.290687] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
[    0.290782] system 00:09: iomem range 0xfec00000-0xfec000ff could not be reserved
[    0.290877] system 00:09: iomem range 0xfed20000-0xff41ffff could not be reserved
[    0.290971] system 00:09: iomem range 0xfed90000-0xfed9afff could not be reserved
[    0.291071] system 00:0a: iomem range 0xfeda0000-0xfedbffff could not be reserved
[    0.291167] system 00:0a: iomem range 0xfec01000-0xfec01fff could not be reserved
[    0.321715] PCI: region 0000:02:06.0/9 too large: 0x0000000000000000-0x0000000003ffffff
[    0.321818] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[    0.321886]   IO window: 0x00003000-0x000030ff
[    0.321956]   IO window: 0x00003400-0x000034ff
[    0.322025]   MEM window: 0x10000000-0x13ffffff
[    0.322094] PCI: Bridge: 0000:00:1e.0
[    0.322159]   IO window: 3000-3fff
[    0.322226]   MEM window: 0xd0000000-0xd03fffff
[    0.322297]   PREFETCH window: disabled.
[    0.322381] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.322407] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
[    0.322562] NET: Registered protocol family 2
[    0.322732] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.323028] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.323161] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.324528] TCP: Hash tables configured (established 8192 bind 8192)
[    0.324599] TCP reno registered
[    0.324745] NET: Registered protocol family 1
[    0.324940] checking if image is initramfs... it is
[    0.792198] Switched to high resolution mode on CPU 0
[    0.978170] Freeing initrd memory: 6068k freed
[    0.979062] audit: initializing netlink socket (disabled)
[    0.979154] type=2000 audit(1273085229.976:1): initialized
[    0.979361] Total HugeTLB memory allocated, 0
[    0.979528] VFS: Disk quotas dquot_6.5.1
[    0.979628] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.979753] msgmni has been set to 484
[    0.979966] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.980081] io scheduler noop registered
[    0.980146] io scheduler anticipatory registered
[    0.980213] io scheduler deadline registered
[    0.980294] io scheduler cfq registered (default)
[    0.980376] pci 0000:00:02.0: Boot video device
[    0.980858] isapnp: Scanning for PnP cards...
[    1.335239] isapnp: No Plug & Play device found
[    1.338257] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.338893] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 22
[    1.339029] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[    1.341051] brd: module loaded
[    1.341219] PNP: PS/2 Controller [PNP0303:C1C2,PNP0f13:C1C3] at 0x60,0x64 irq 1,12
[    1.343179] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.343996] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.344075] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.344145] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.344214] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.344283] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.344507] mice: PS/2 mouse device common for all mice
[    1.344807] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.344897] rtc0: alarms up to one month, y3k
[    1.344996] cpuidle: using governor ladder
[    1.345061] cpuidle: using governor menu
[    1.345132] No iBFT detected.
[    1.345675] TCP cubic registered
[    1.345738] NET: Registered protocol family 17
[    1.345821] Using IPI No-Shortcut mode
[    1.346083] registered taskstats version 1
[    1.346304] rtc_cmos 00:05: setting system clock to 2010-05-05 18:47:11 UTC (1273085231)
[    1.346558] Freeing unused kernel memory: 244k freed
[    1.378148] input: AT Translated Set 2 keyboard as /class/input/input0
[    1.447300] ACPI: Transitioning device [C248] to D3
[    1.447477] ACPI: PNP0C0B:00 is registered as cooling_device0
[    1.447551] ACPI: Fan [C248] (off)
[    1.447842] ACPI: Transitioning device [C249] to D3
[    1.447959] ACPI: PNP0C0B:01 is registered as cooling_device1
[    1.448067] ACPI: Fan [C249] (off)
[    1.448358] ACPI: Transitioning device [C24A] to D3
[    1.448572] ACPI: PNP0C0B:02 is registered as cooling_device2
[    1.448646] ACPI: Fan [C24A] (off)
[    1.448939] ACPI: Transitioning device [C24B] to D3
[    1.449049] ACPI: PNP0C0B:03 is registered as cooling_device3
[    1.449122] ACPI: Fan [C24B] (off)
[    1.456197] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.456197] ACPI: ACPI0007:00 is registered as cooling_device4
[    1.456197] ACPI: Processor [C000] (supports 8 throttling states)
[    1.472317] ACPI: LNXTHERM:01 is registered as thermal_zone0
[    1.476466] ACPI: Thermal Zone [TZ1] (44 C)
[    1.487295] ACPI: LNXTHERM:02 is registered as thermal_zone1
[    1.491419] ACPI: Thermal Zone [TZ2] (30 C)
[    1.492306] Marking TSC unstable due to: TSC halts in idle.
[    1.496322] ACPI: LNXTHERM:03 is registered as thermal_zone2
[    1.502151] ACPI: Thermal Zone [TZ3] (29 C)
[    1.504501] ACPI: LNXTHERM:04 is registered as thermal_zone3
[    1.507087] ACPI: Thermal Zone [TZ4] (61 C)
[    1.960905] usbcore: registered new interface driver usbfs
[    1.961011] usbcore: registered new interface driver hub
[    1.961127] usbcore: registered new device driver usb
[    1.962546] USB Universal Host Controller Interface driver v3.0
[    1.962668] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[    1.962803] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    1.962808] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.963039] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.963167] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002000
[    1.963325] usb usb1: configuration #1 chosen from 1 choice
[    1.963427] hub 1-0:1.0: USB hub found
[    1.963497] hub 1-0:1.0: 2 ports detected
[    2.064196] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.064276] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.064369] usb usb1: Product: UHCI Host Controller
[    2.064437] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    2.064507] usb usb1: SerialNumber: 0000:00:1d.0
[    2.064613] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[    2.064752] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    2.064757] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.064851] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    2.064980] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00002020
[    2.065147] usb usb2: configuration #1 chosen from 1 choice
[    2.065249] hub 2-0:1.0: USB hub found
[    2.065320] hub 2-0:1.0: 2 ports detected
[    2.168182] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.168263] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.168358] usb usb2: Product: UHCI Host Controller
[    2.168425] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    2.168493] usb usb2: SerialNumber: 0000:00:1d.1
[    2.168597] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    2.168736] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    2.168741] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.168835] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    2.168964] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[    2.169135] usb usb3: configuration #1 chosen from 1 choice
[    2.169237] hub 3-0:1.0: USB hub found
[    2.169307] hub 3-0:1.0: 2 ports detected
[    2.272183] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.272267] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.272362] usb usb3: Product: UHCI Host Controller
[    2.272431] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    2.272500] usb usb3: SerialNumber: 0000:00:1d.2
[    2.272646] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[    2.272786] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    2.272791] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.272884] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    2.273017] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00002060
[    2.273184] usb usb4: configuration #1 chosen from 1 choice
[    2.273284] hub 4-0:1.0: USB hub found
[    2.273354] hub 4-0:1.0: 2 ports detected
[    2.376189] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.376272] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.376366] usb usb4: Product: UHCI Host Controller
[    2.376435] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[    2.376507] usb usb4: SerialNumber: 0000:00:1d.3
[    2.376721] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[    2.376866] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    2.376871] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.376968] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    2.380992] ehci_hcd 0000:00:1d.7: debug port 1
[    2.381064] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    2.381073] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0580000
[    2.396036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    2.396235] usb usb5: configuration #1 chosen from 1 choice
[    2.396337] hub 5-0:1.0: USB hub found
[    2.396410] hub 5-0:1.0: 8 ports detected
[    2.419758] No dock devices found.
[    2.448366] SCSI subsystem initialized
[    2.493227] libata version 3.00 loaded.
[    2.500179] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.500261] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.500354] usb usb5: Product: EHCI Host Controller
[    2.500421] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[    2.500490] usb usb5: SerialNumber: 0000:00:1d.7
[    2.500858] ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 22 (level, low) -> IRQ 22
[    2.550820] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[d0001000-d00017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    2.615292] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
[    2.615571] Uniform Multi-Platform E-IDE driver
[    2.615639] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    2.672121] ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
[    2.672226] b44.c:v2.0
[    2.692462] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:60:af:8c:a5
[    2.695453] ICH6: IDE controller (0x8086:0x266f rev 0x03) at  PCI slot 0000:00:1f.1
[    2.695561] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[    2.695698] ICH6: not 100% native mode: will probe irqs later
[    2.695775] ICH6: IDE port disabled
[    2.695844]     ide0: BM-DMA at 0x2580-0x2587
[    2.695915] Probing IDE interface ide0...
[    2.984356] hda: FUJITSU MHV2040AH, ATA DISK drive
[    3.288057] Clocksource tsc unstable (delta = -306198646 ns)
[    3.432352] hdb: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive
[    3.488124] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    3.491759] hda: UDMA/100 mode selected
[    3.495388] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    3.496250] hdb: MWDMA2 mode selected
[    3.496732] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    3.613026] hda: max request size: 128KiB
[    3.613100] hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63
[    3.618045] hda: cache flushes supported
[    3.618165]  hda: hda1 hda2 hda3
[    3.654069] hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[    3.654365] Uniform CD-ROM driver Revision: 3.20
[    3.876188] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[718b5000294d0da6]
[    4.033242] PM: Starting manual resume from disk
[    4.080804] kjournald starting.  Commit interval 5 seconds
[    4.080804] EXT3-fs: mounted filesystem with ordered data mode.
[    5.648387] udevd version 125 started
[    6.706523] Linux agpgart interface v0.103
[    6.709764] agpgart: Detected an Intel 915GM Chipset.
[    6.710123] agpgart: Detected 7932K stolen memory.
[    6.730925] agpgart: AGP aperture is 256M @ 0xc0000000
[    7.221050] input: Power Button (FF) as /class/input/input1
[    7.251617] ACPI: Power Button (FF) [PWRF]
[    7.251818] input: Sleep Button (CM) as /class/input/input2
[    7.279779] ACPI: Sleep Button (CM) [C1E8]
[    7.279926] input: Lid Switch as /class/input/input3
[    7.294914] ACPI: Lid Switch [C1E9]
[    7.304617] ACPI: AC Adapter [C172] (off-line)
[    7.595938] ACPI: Battery Slot [C174] (battery present)
[    7.596293] ACPI: Battery Slot [C173] (battery absent)
[    7.598501] ACPI: WMI: Mapper loaded
[    8.060302] input: Video Bus as /class/input/input4
[    8.092075] ACPI: Video Device [C055] (multi-head: yes  rom: no  post: no)
[    8.746807] intel_rng: FWH not detected
[    8.758163] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 22
[    8.758312] PCI: Setting latency timer of device 0000:00:1e.3 to 64
[    8.770751] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 21
[    8.770909] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[    9.104301] input: PC Speaker as /class/input/input5
[    9.698410] intel8x0_measure_ac97_clock: measured 57786 usecs
[    9.698489] intel8x0: clocking to 48000
[    9.698873] Yenta: CardBus bridge found at 0000:02:06.0 [103c:099c]
[    9.698970] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[    9.699037]   IO window: 0x00003000-0x000030ff
[    9.699106]   IO window: 0x00003400-0x000034ff
[    9.699176]   PREFETCH window: 0x14000000-0x143fffff
[    9.699246]   MEM window: 0x10000000-0x13ffffff
[    9.699318] Yenta: Enabling burst memory read transactions
[    9.699391] Yenta: Using INTVAL to route CSC interrupts to PCI
[    9.699461] Yenta: Routing CardBus interrupts to PCI
[    9.699533] Yenta TI: socket 0000:02:06.0, mfunc 0x01aa1b22, devctl 0x64
[    9.729543] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
[    9.729649] serio: Synaptics pass-through port at isa0060/serio4/input0
[    9.773851] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[    9.928813] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
[    9.928891] Socket status: 30000006
[    9.928955] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[    9.929055] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[    9.929126] cs: IO port probe 0x3000-0x3fff: clean.
[    9.929508] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd03fffff
[   10.304134] cs: IO port probe 0x100-0x3af: clean.
[   10.305947] cs: IO port probe 0x3e0-0x4ff: clean.
[   10.306768] cs: IO port probe 0x820-0x8ff: clean.
[   10.307450] cs: IO port probe 0xc00-0xcf7: clean.
[   10.308268] cs: IO port probe 0xa00-0xaff: clean.
[   10.968934] Adding 1751076k swap on /dev/hda3.  Priority:-1 extents:1 across:1751076k
[   11.026110] EXT3 FS on hda2, internal journal
[   12.020395] loop: module loaded
[   15.742714] NET: Registered protocol family 10
[   15.743294] lo: Disabled Privacy Extensions
[   15.744788] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.077238] lp: driver loaded but no devices found
[   16.131432] ppdev: user-space parallel port driver
[   18.300394] Bluetooth: Core ver 2.11
[   18.302485] NET: Registered protocol family 31
[   18.302560] Bluetooth: HCI device and connection manager initialized
[   18.302633] Bluetooth: HCI socket layer initialized
[   18.488322] Bluetooth: L2CAP ver 2.9
[   18.488392] Bluetooth: L2CAP socket layer initialized
[   18.516431] Bluetooth: RFCOMM socket layer initialized
[   18.516514] Bluetooth: RFCOMM TTY layer initialized
[   18.516582] Bluetooth: RFCOMM ver 1.8
[   22.256018] usb 1-2: new low speed USB device using uhci_hcd and address 2
[   22.432183] usb 1-2: configuration #1 chosen from 1 choice
[   22.436345] usb 1-2: New USB device found, idVendor=046d, idProduct=c03e
[   22.436351] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   22.436354] usb 1-2: Product: USB-PS/2 Optical Mouse
[   22.436357] usb 1-2: Manufacturer: Logitech
[   22.667507] usbcore: registered new interface driver hiddev
[   22.680643] input: Logitech USB-PS/2 Optical Mouse as /class/input/input7
[   22.708055] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2
[   22.708080] usbcore: registered new interface driver usbhid
[   22.708084] usbhid: v2.6:USB HID core driver
[   23.298924] [drm] Initialized drm 1.1.0 20060810
[   23.302549] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   23.302559] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   23.302651] [drm] Initialized i915 1.6.0 20060119 on minor 0
[  191.816229] b44: eth0: Link is up at 100 Mbps, full duplex.
[  191.816234] b44: eth0: Flow control is off for TX and off for RX.
[  191.816357] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  202.596066] eth0: no IPv6 routers present
[  262.379949] UDF-fs: No VRS found
[  262.408998] ISO 9660 Extensions: Microsoft Joliet Level 3
[  262.627526] ISO 9660 Extensions: RRIP_1991A
[ 2399.015941] UDF-fs: No VRS found
[ 2399.336296] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 2399.512352] ISO 9660 Extensions: RRIP_1991A
[ 4299.204396] PM: Syncing filesystems ... done.
[ 4299.211133] Freezing user space processes ... (elapsed 0.05 seconds) done.
[ 4299.264059] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 4299.264278] Suspending console(s)
[ 4299.264838] ACPI: PCI interrupt for device 0000:00:02.0 disabled
[ 4300.332456] b44: eth0: powering down PHY
[ 4300.856873] ACPI handle has no context!
[ 4300.857118] ACPI: PCI interrupt for device 0000:02:0e.0 disabled
[ 4300.857208] ACPI handle has no context!
[ 4300.872369] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 4300.888247] ACPI: PCI interrupt for device 0000:00:1e.2 disabled
[ 4300.888368] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 4300.904120] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 4300.904154] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 4300.904188] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 4300.904222] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 4300.911124] ACPI: Preparing to enter system sleep state S3
[ 4300.912066] Disabling non-boot CPUs ...
[ 4300.912066] Intel machine check architecture supported.
[ 4300.912075] Intel machine check reporting enabled on CPU#0.
[ 4300.912120] Back to C!
[ 4300.912398] Force enabled HPET at resume
[ 4301.345290] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 4301.469094] PM: Writing back config space on device 0000:00:02.0 at offset f (was 100, writing 10b)
[ 4301.469094] PM: Writing back config space on device 0000:00:02.0 at offset 7 (was 0, writing d0480000)
[ 4301.469094] PM: Writing back config space on device 0000:00:02.0 at offset 6 (was 8, writing c0000008)
[ 4301.469094] PM: Writing back config space on device 0000:00:02.0 at offset 5 (was 1, writing 7001)
[ 4301.469094] PM: Writing back config space on device 0000:00:02.0 at offset 4 (was 0, writing d0400000)
[ 4301.469094] PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900000, writing 900003)
[ 4301.489291] PM: Writing back config space on device 0000:00:02.1 at offset 4 (was 0, writing d0500000)
[ 4301.489299] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
[ 4301.489312] uhci_hcd 0000:00:1d.0: enabling device (0000 -> 0001)
[ 4301.489319] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 4301.489328] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 4301.489335] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
[ 4301.489349] PM: Writing back config space on device 0000:00:1d.0 at offset 8 (was 1, writing 2001)
[ 4301.489389] usb usb1: root hub lost power or was reset
[ 4301.489425] uhci_hcd 0000:00:1d.1: enabling device (0000 -> 0001)
[ 4301.489429] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 4301.489436] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 4301.489443] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20a)
[ 4301.489458] PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing 2021)
[ 4301.489494] usb usb2: root hub lost power or was reset
[ 4301.489512] uhci_hcd 0000:00:1d.2: enabling device (0000 -> 0001)
[ 4301.489516] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 4301.489524] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 4301.489531] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30a)
[ 4301.489545] PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 2041)
[ 4301.489581] usb usb3: root hub lost power or was reset
[ 4301.489599] uhci_hcd 0000:00:1d.3: enabling device (0000 -> 0001)
[ 4301.489603] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 4301.489611] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 4301.489618] PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 40a)
[ 4301.489632] PM: Writing back config space on device 0000:00:1d.3 at offset 8 (was 1, writing 2061)
[ 4301.489669] usb usb4: root hub lost power or was reset
[ 4301.504086] ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
[ 4301.504090] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 4301.504097] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4301.504112] PM: Writing back config space on device 0000:00:1d.7 at offset f (was 100, writing 10b)
[ 4301.504132] PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing d0580000)
[ 4301.504197] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 4301.504214] PM: Writing back config space on device 0000:00:1e.2 at offset f (was 100, writing 10b)
[ 4301.504229] PM: Writing back config space on device 0000:00:1e.2 at offset 7 (was 0, writing d0582000)
[ 4301.504235] PM: Writing back config space on device 0000:00:1e.2 at offset 6 (was 0, writing d0581000)
[ 4301.504241] PM: Writing back config space on device 0000:00:1e.2 at offset 5 (was 1, writing 2201)
[ 4301.504247] PM: Writing back config space on device 0000:00:1e.2 at offset 4 (was 1, writing 2101)
[ 4301.504256] PM: Writing back config space on device 0000:00:1e.2 at offset 1 (was 2900000, writing 2900003)
[ 4301.504273] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 21
[ 4301.504281] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 4302.532074] PM: Writing back config space on device 0000:00:1e.3 at offset f (was 200, writing 20a)
[ 4302.532093] PM: Writing back config space on device 0000:00:1e.3 at offset 5 (was 1, writing 2501)
[ 4302.532099] PM: Writing back config space on device 0000:00:1e.3 at offset 4 (was 1, writing 2401)
[ 4302.532108] PM: Writing back config space on device 0000:00:1e.3 at offset 1 (was 2900000, writing 2900001)
[ 4302.532126] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 22
[ 4302.532133] PCI: Setting latency timer of device 0000:00:1e.3 to 64
[ 4303.536677] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b)
[ 4303.536712] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 4303.536732] PM: Writing back config space on device 0000:02:06.0 at offset f (was 34001ff, writing 5c0010a)
[ 4303.536739] PM: Writing back config space on device 0000:02:06.0 at offset e (was 0, writing 34fc)
[ 4303.536746] PM: Writing back config space on device 0000:02:06.0 at offset d (was 0, writing 3400)
[ 4303.536753] PM: Writing back config space on device 0000:02:06.0 at offset c (was 0, writing 30fc)
[ 4303.536759] PM: Writing back config space on device 0000:02:06.0 at offset b (was 0, writing 3000)
[ 4303.536766] PM: Writing back config space on device 0000:02:06.0 at offset a (was 0, writing 13fff000)
[ 4303.536773] PM: Writing back config space on device 0000:02:06.0 at offset 9 (was 0, writing 10000000)
[ 4303.536780] PM: Writing back config space on device 0000:02:06.0 at offset 8 (was 0, writing 143ff000)
[ 4303.536787] PM: Writing back config space on device 0000:02:06.0 at offset 7 (was 0, writing 14000000)
[ 4303.536793] PM: Writing back config space on device 0000:02:06.0 at offset 6 (was b0000000, writing b0060302)
[ 4303.536802] PM: Writing back config space on device 0000:02:06.0 at offset 4 (was 0, writing d0000000)
[ 4303.536809] PM: Writing back config space on device 0000:02:06.0 at offset 3 (was 820000, writing 82a808)
[ 4303.536818] PM: Writing back config space on device 0000:02:06.0 at offset 1 (was 2100000, writing 2100007)
[ 4303.692075] PM: Writing back config space on device 0000:02:06.2 at offset f (was 4020300, writing 402030a)
[ 4303.692098] PM: Writing back config space on device 0000:02:06.2 at offset 5 (was 0, writing d0004000)
[ 4303.692105] PM: Writing back config space on device 0000:02:06.2 at offset 4 (was 0, writing d0001000)
[ 4303.692111] PM: Writing back config space on device 0000:02:06.2 at offset 3 (was 800000, writing 804010)
[ 4303.692120] PM: Writing back config space on device 0000:02:06.2 at offset 1 (was 2100000, writing 2100006)
[ 4303.741850] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[d0001000-d00017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[ 4303.756043] b44 0000:02:0e.0: enabling device (0000 -> 0002)
[ 4303.756048] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4303.756059] PM: Writing back config space on device 0000:02:0e.0 at offset f (was 100, writing 10b)
[ 4303.756079] PM: Writing back config space on device 0000:02:0e.0 at offset 4 (was 0, writing d000e000)
[ 4303.756085] PM: Writing back config space on device 0000:02:0e.0 at offset 3 (was 0, writing 4000)
[ 4303.756093] PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was 100002, writing 100006)
[ 4305.100007] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4305.107075] hda: UDMA/100 mode selected
[ 4305.112620] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4305.112958] hdb: MWDMA2 mode selected
[ 4305.388035] usb 1-2: reset low speed USB device using uhci_hcd and address 2
[ 4305.712050] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4305.712056] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 4305.715940] Restarting tasks ... done.
[ 4590.000234] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 4590.000240] b44: eth0: Flow control is off for TX and off for RX.
miro@MIRO-ntb:~/Desktop$ 

lspci:

Kód:

00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)

mirom · Napísal autor témy **mirom**: 06.05.2010 14:36

Uz mi dochadzaju nervi

Stale nemam Chrome, ani youtube nejde naviac je to setko strasne zlozite cez tu konzolu. Pamatam si aj ked som Ubuntu pouzival len velmi kratko tak tam bolo hned nieco ako je vo win. start a tam boli vsetky veci a bola tam moznost hladat potrebne aplikacie cez nejaky program alebo co to bolo, len som napisal priblizny nazov uz som hladal, potom som len kikol a samo sa to nainstalovalo. Nieje nievo take aj tu? Ta konzola mi zere nervi. V ubuntu som tiez napr. Chrome stiahol a dvojklikom podobne ako vo Windowse nainstaloval ziadne taketo blbosti s konzolou. Bolo tam aj nieco ako dokumenty atd. tu nieje NIC! Ak by existoval nejaky velky balik veci co by sa dal naraz nainstalovat tak mi prosim dajte navod lebo zatial to vidim tak, ze format a hura ubuntu :roll:

klesco · Napísal **klesco**: 06.05.2010 17:03

chrome nainstalujes tak, ze si zapnes terminal, prihlasis sa za roota

Kód:

su root

prejdes do zlozky v ktorej mas *.deb balik chromu (pomocou cd [cd ..] ides o zlozku vyssie [cd nazov zlozky] ides do zlozky s tym nazvom...) a zadas

Kód:

dpkg -i nazov_balika.deb

to iste spravis s flashom... stiahnes si *.deb z: http://get.adobe.com/flashplayer/ a presne ten isty postup...

keby ti to neslo, napis co ti vypisalo, ako problem? napr. chybajuce zavislosti??

mirom · Napísal autor témy **mirom**: 06.05.2010 18:07

SKVELE! Konecne mam naiinstalovany Chrome v ktorom mi youtube ide asi tam bol flash predinstalovany, v iceweasel nejde ale je mi to vlastne jedno aj tak budem pouzivat chrome. (flash sa mi nedal nainstalovat stiahol som .deb a aj tak napisalo ze nieje podporovany debianom alebo nieco take). Uz som skusal aj prehrat nejaku mp3 a ide to ale audio CD a ani DVD film mi neprehrava neviem preco a ine formaty som zatial neskusal ale predpokladam, ze ani tie nepojdu tak by som poprosil keby bol nejaky balik ako je codeck pack alebo nieco aby mi sli formaty ako avi atd. (bene veci).
Este ale mi povecte ako si dam do toho spodneho panelu ci co to je odkaz na chrome a openoffice a tak dalej proste veci co budem casto pouzivat. Viem, ze sa tam da dat prave tlacidko a pridat novu polozku ale tam niesu na vyber aplikacie.

btw. keby sa niekomu chcelo tak prosim link na presne ten flash co mam stiahnut lebo som asi stiahol blbost.
AA este jedem problem, nedaju sa mi vymazat veci z plochy napise to, ze subor neexistuje.

klesco · Napísal **klesco**: 06.05.2010 21:17

co sa tyka tych aviciek tak si nainstaluj vlc, do konzoly (pod rootom samozrejme) daj

Kód:

apt-get install vlc libdvdcss2

flash mozes nainstalovat do mozilly (iceweasel) aj tak, ze si stiahnes tento archiv: http://get.adobe.com/flashplayer/thanky ... .tar.gz%29
rozbalis ho pomocou prikazu

Kód:

tar zxvf install_flash_player_10_linux.tar.gz

Pojdes do pricinka /usr/lib/mozilla/plugins ak ten pricinok neexistuje, tak si ho urob prikazom (pod rootom)

Kód:

mkdir /usr/lib/mozilla/plugins

Potom pojdes do v priecinka so suborom libflashplayer.so a nakopirujes tento subor do priecinka /usr/lib/mozilla/plugins/ napr. prikazom (pod rootom)

Kód:

cp libflashplayer.so /usr/lib/mozilla/plugins/

klesco · Napísal **klesco**: 06.05.2010 21:28

a co tyka tych odkazov na spodnom paneli, das si ich tam, tak, ze bud pretiahnes odkaz z tych aplikacii hore, aleb das pravym tlacitkom na spodny panel, das add to panel (najvyssie) das custom application launcher (najvyssie) a do name si daj hocico a command daj

Kód:

/opt/google/chrome/google-chrome %U

(kod plati pre chrome)

mirom · Napísal autor témy **mirom**: 06.05.2010 21:49

"Toto aptitude nema schopnost posvatnej kravy" ? ? WTF?! :-D

to mi dalo ked som chcel instalovat vlc.

// a este som si instaloval nejaky debian multimedia codeck ale v navode bolo, ze ked to nainstalujem este mam skopirovat cosi do nejakeho textoveho dokumentu len neviem ako ho mam otvorit ako root. instaloval som toto http://linuxhelp.blogspot.com/2007/04/i ... ss-in.html

klesco · Napísal **klesco**: 06.05.2010 22:04

ked budes vyuzivat vlc, tak su ti tie kodeky nanic... ale ked sa uz pytas, tak prikazom

Kód:

nano /etc/apt/sources.list

mirom · Napísal autor témy **mirom**: 06.05.2010 22:25

A ku tomu VLC tak krava co znamena..akoto mam nainstalovat

// a este dalsi problem: neotvara mi to externy HDD moze to byt tym, ze je naformatovany na NTFS?

programmer · Napísal **programmer**: 08.05.2010 10:34

Citácia:

ten Debian mi pride az ANTIuser friendly.

Kadžý linux je tak user friendly, ako si ho ty vytuninguješ. To záleží do toho, aké si dáš pracovné prostredie a ako si ho ponastavuješ. Pripúšťam, že môže byť pre teba ešte ťažké nainštalovať nový program, ale to si zvykneš. Tu sú linky na niektoré videá, aby si sa mohol presvedčiť, že dobre vytunený Linux zašije aj najnovší Windows 7, čo sa týta (nielen) pracovného prostredia:
http://www.youtube.com/watch?v=-6uFxxlKa4g
http://www.youtube.com/watch?v=l_C8WJYh7IE
http://www.youtube.com/watch?v=-VwBcwHQyb0
http://www.youtube.com/watch?v=xC5uEe5O ... =1&index=2

Citácia:

"Toto aptitude nema schopnost posvatnej kravy" ? ? WTF?!

Tá krava sa dá aj pozrieť, ako vyzerá v termináli

Volá sa to, že veľkonočné vajíčko. Veľkonočné vajíčka sú oficiálne nezdokumentované niektoré vtipné funkcie programov v Linuxe.

Viac o tom nájdeš na internete.

mirom · Napísal autor témy **mirom**: 08.05.2010 10:42

hh easter eggs..viem to byva aj v hrach ale necakal som to v OS :-D

No dobre tak potreboval by som vediet ako nainstalujem ten VLC a ako rozchodim externy HDD.

Rychly Linux

Podobné témy