Na Gigabyte 965P-DS4 nechce 640Gb CaviarBlack robit na Sata2

Mam dosku Gigabyte 965P-DS4 a pouzivam v nom 2 HDD jeden je Samsung 320Gb HD321KJ a druhy je WDC 6401AALS, obidva podporuju Sata II. Problem je v tom, ze v BIOSe neviem nastavit, aby mi oba disky pracovali ako SATA II. Ked pustim HDTUNE a dam info vypise sa mi:
HD Tune Pro: SATA WDC WD6401AALS-0 Information
Firmware version : 01.03B01
Capacity : 596.2 GB (~640.1 GB)
Buffer size : 33553920 bytes
Standard : ATA/ATAPI-8 - SATA II
Supported mode : UDMA Mode 6 (Ultra ATA/133)
Current mode : UDMA Mode 6 (Ultra ATA/133)

S.M.A.R.T : yes
48-bit Address : yes
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Firmware Upgradable : yes
Automatic Acoustic Management: yes
Power Management : yes
Advanced Power Management : no
Interface Power Management : yes
Power-up in Standby : yes
Security Mode : yes
Native Command Queuing (NCQ) : yes

U Samsungu je to to iste len UDMA 133. Raid pole nechcem potrebujem len rozbehat SATA II

Prosim o radu

to mas dobre mne pise supported DMA 7 a active DMA 5

btw je to normalne ... neries to proste to berie ako IDE zariadenie rychlosti to neovplyvnuje...
ved S-ATA je tiez ATA

Neviem, podls mna to nieje dobre. Ma s tym niekto skusenosti?

PRave som ti napisal , ja s tym mam skusenosti a je to dobre.
Rychlost disku mam taku ako sa uvadza vsade v testoch na nete takisto aj rychlost medzi diskom a cache

Asi mas pravdu, skusal som nastavit v BIOSe vsetko mozne Everest mi pred nazvom disky pise SATA a HDTUNE len UDMA 133. Inak ked som disky pripojil na radic ICH8R ukazovalo sa mi UDMA 100 a Teraz to mam na GSATA radici. Ovladace som nainstaloval vsetky dostupne. A co sa tyka toho Samsungu aj mne nejde naplno...

HD Tune Pro: SATA SAMSUNG HD321KJ Information

Firmware version : CP100-10
Capacity : 298.1 GB (~320.1 GB)
Buffer size : 16384 KB
Standard : ATA/ATAPI-0 - SATA II
Supported mode : UDMA Mode 7 (Ultra ATA/512)
Current mode : UDMA Mode 6 (Ultra ATA/133)

S.M.A.R.T : yes
48-bit Address : yes
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Firmware Upgradable : yes
Automatic Acoustic Management: yes
Power Management : yes
Advanced Power Management : no
Interface Power Management : yes
Power-up in Standby : no
Security Mode : yes
Native Command Queuing (NCQ) : yes

Volume : Nový zväzok (E:)
Capacity : 305241 MB
Free : 305143 MB
Usage : 0%
File system : NTFS

jak vies ze nejde naplno, prejdi ho benchmarkmi na r/w rychlosti a uvidis kolko dava

Bohuzial na nete som ziadem test noveho 640Gb WD Caviar Black AALS nenasiel
HD Tune Pro: SATA WDC WD6401AALS-0 Benchmark

Read transfer rate
Transfer Rate Minimum : 1.2 MB/sec
Transfer Rate Maximum : 109.9 MB/sec
Transfer Rate Average : 64.4 MB/sec
Access Time : 15.3 ms
Burst Rate : 101.8 MB/sec
CPU Usage : 7.8%

PODLA MNA MIZERNE VYSLEDKY testujem este Samsung stary starucicky

HD Tune Pro: SATA SAMSUNG HD321KJ Benchmark

Read transfer rate
Transfer Rate Minimum : 10.6 MB/sec
Transfer Rate Maximum : 63.5 MB/sec
Transfer Rate Average : 35.9 MB/sec
Access Time : 16.9 ms
Burst Rate : 58.7 MB/sec
CPU Usage : 10.8%

Neco mam asi zle nastavene