INSTALOVANIE BEZDROTOVEJ KLAVESNICE

CHALANI MAM PROBLEM ..,nainstaloval som ovladace.,baterky su aj v klavesnici aj v mysi..a ked stlacim to tlacitko na vysielaci co ide z USB portu .......tak my vypise tuto tabulku..neviem ako to spravit nech to ide konecne,na mysi ani klavesnici nie su ziadne gombiky na zapinanie ani nic podobne ...je to znacka chicony


toto vypise po stlaceni toho tlacitka:

Warning!Receiver Channel changed.

when you see this notice that means your receiver is in the channel setting mode.
Please follow below instruction to select your preferred channel.
Otherwise please wait 30 seconds until receiver resets automatically.
Your keyboard or mouse will stop working until completing this procedure or receiver resets.

To change channels or ID
the procedurees below are to change the ID or channel.
Change the ID can prevent other receiver to get yout key codes.
Change the channel can improve the receiver sensitivity.

Change ID.
Please press the ID button on the bottom of the keyboard or mouse for more than two seconds,
and then the ID will be changed when release the ID button.

Change channel
Please press the ID button on the bottom of the keyboard or mouse and then release it,
the channel of the keyboard or mouse will be changed.
Notice not press the ID button for more than two seconds,
because the ID will be change by this way.

NOTE: The keyboard or mouse and receiver will go back to the original setting
if the change is not completed in 30 second.

prosim pomozte.

sak tam mas vsetko napisane zospodu na klavesnici aj mysi mas male tlacitko na nastavenie ID zariadenia, stlacis to na aspon dve sekundy na klavesnici potom na mysi(na poradi nezalezi) a potom(abo este predtym skus pripadne aj aj) stlacis to na primaci v USBcku

a nepis ze ten gombik zospodu na klavesnici neni, laskavo vytiahni navod(krabicu) kde budes mat cely postup a aj nakres, ten gombik je maly, zväcsa robeny tak aby sa dal stlacit perom

ale nejde to ........moze s mi dat presny postup::???...neviem velmi po anglicky

sak som ti ho dal, stlac tlacidlo na USB primaci, potom na klavesnici a potom na mysi, ak nie tak najprv mys a klavesnica a az potom USB

u mna to je tak ze stlacim na vysielaci a na klavesnici naraz potom tak isto aj u mysi a ide to vzdy

uff a ja som si myslel ze to bude plug and play

ale ono to je plug&play

//Shark: Omega kym nemas co povedat k teme tak neprispievaj. dik