asus EEE 1000h vs 1000HD

ano, ved sa pytam ze ci ich neni malo na 10".
lebo logika hovori, ze cim menej pixelov, tym su vacsie nie ?
asi som sa zle vyjadril.
napriklad WSXGA+ na 15.4" ma viac pixelov ako WXGA na 15.4", to znamena, ze ich ma mensie, lebo keby boli rovnako velke, tak sa tam nezmestia
jednoducho sa mi zda, ze 1024x600 je na 10" malo, to znamena ze pixely su velke. Myslim tym velky raster. chapes ma ? uz inak to neviem napisat

ty pises
"lebo je ich dost malo na take rozlisenie "

to je to iste ako ked povies ze 5 je primalo na 5
rozlisenie=pocet pixelov
chapes sa?

raster je len mierne horsi ako pri 15,4 notasoch s WXGA, za tie prachy nemozes chcet nejaky exrta jemny

aha, uz som pochopil.
preformulujem vetu: "lebo je ich dost malo na taku uhlopriecku".

filmy ani obrazky predsa nemas rastrovane, tam nevidno ziadne stvorceky ani pixle,

to vazne ? ja som myslel ze kazdy pixel svieti iba na jednu farbu, a viacere pixely vytvaraju obraz.
takze 1 pixel moze zobrazovat aj viacej farieb naraz ?
a rozlisenie ovplivnuje iba velkost pisma ?
a preco potom zalezi napriklad pri photoshope na rozliseni ?

subpixel tvori len jednu farebnu zlozku(RGB), pixel sa uz sklada z troch subpixelov

rozlisenie je v praxi len otazka komfortu a kvality presnejsie jemnosti zobrazenia

aha, jasne, rozumiem dik.
takze pri hrani hier a pozerani filmov mi bude jedno ze ci mam 1024x600 alebo napriklad 1280x800 ?
toto je taky lajcky priklad: pri hrani GTA san andreas bude mat pri 1280x800 hlava hlavnej postavy velkost napriklad 500 pixelov a pri 1024x600 len 300 pixelov ? lebo ked bude mat jeho hlava 500 pixelov, tak bude obraz detajlnejsi (oci, usta,..) nie ?

pri vyssom rozliseni je samozrejme obraz detailnejsi(ak to dovoluju textury a modely)
priklad


hore obrazok pri rozlisku 1920x1080, dole rovnaky obrazok akurat s rozlisenim 800x450 pri zachovani velkost aby si mal predstavu co to spravi

ved to je len minimalny rozdiel, ked zoberiem do uvahy ze 1920x1080 je 3 krat vacsie rozlisenie.

prepacte ze obnovujem tuto temu ale mam taky problem.
na youtube som videl plno videi ako idu hry na asuse eee 1000H, a nejake hry som na nom skusil aj ja.
lenze mne na nom seka aj GTA SA, a dokonca aj NFS Hot Pursuit 2.
mam procesor Intel Atom 1,6Ghz a 1GB RAM.
neviete mi poradit ?
a este jeden problem.
nejde mi spustit GTA SA.
prvy den to islo, ale teraz nejde.
spustim hru, pustia sa tie presypacie hodiny, a po cca dvoch sekundach zmiznú a nic sa nedeje, hra sa nespusti.
skusal som aj preinstalovat hru, ale stale nic.
mozete mi niekto pomoct s tymito dvoma problemami ? dakujem

Tie dane hry ti sekaju z dovodu Integrovanej Grafiky (konkretne i945GC) ktora nieje moc vykonna
Mozes skusit procesor taktnut na 2.0GHz ale moc ti to na vykone neprida.
Neviem si teraz spomenut na jeden program ktory sa staral o Takt procesoru a Beh ventilatoru. Ale mrknem sa ti na to.

//Mam to vola sa to eeectl. http://forum.eeeuser.com/viewtopic.php?id=47753&p=2 Tu sa o nom docitas viac.
Ked som mal este eee tak som to aktivne vyuzival.
Len pozor na zakladny Konfig subor ... Od stiahnutia to je nastavene na stare eee701.
Cize to zatial pouzivaj na regulaciu Ventilatora ... Nechytaj sa CPU lebo ti zamrzne.

//Nasiel som eeectl.ini na 1000H

Toto si nakopiruj do povodneho eeectl.ini

A TUsi ho stiahnes. Len nezabudni prepisat .ini subor

no ja som stiahol ten program a aj mi ide.
ked dam CPU na 1,0Ghz tak je rozdiel citit, ale ked ho dam na 2,0Ghz tak nic to nerobi.
a FAN mam nastaveny na 30% (automat).
cize neviem kde je chyba ? a mal si iba 1GB RAMku ?

edit: dakujem ti velmi pekne shark.
ja debil som totiz zabudol prepisat to INI, preto to nemalo ziadny ucinok.
teraz mi ide NFS Hot Pursuit 2 uplne v pohode.
dakujem
len to GTA SA ma trapi.
nevies mi poradit ?

To netusim ... Mne to celkom slo az na par dost neprijemnych Frame Drop-ov
Reinstalaciu si skusil??

ano, asi 4 krat
a co je to FRAME DROP ?

Mas napr v hre 30FPS a raz za 5s sa ti nezobrazia 3Framy a hra viditelne "kusne".

no mam este jeden problem.
vzdy ked pretaktujem CPU na 2000Mhz, a spustim hru, tak vzdy asi po 5 minutach sa mi hra zruší, ukaze sa mi take modre pozadie s pismom podobnym ako v biose a potom sa mi vypne pc.
nevies cim to je ?
a ci je taktovanie na 2,0Ghz uplne bezpecne.
dakujem

noc im to asi bude, nestabilne OC, hladaj co z toho prehrievanie

ale ved FAN v programe eeectl mam nastaveny na automatic.

v eectl musis mat nastaveny fan na Native,
ja ked mam automatic tak mi ho hodi na 0% cize nejde a blue screen mi hodi, ak sa mi prehreje cpu, napriklad stane sa vtedy, ak dam usporny rezim a potom znova nabehnem na klasicky, tak eectl mi nespusti fan ale ostane na 0%, musim ho potom spustit rucne, a to tak ze nastavim napr 30% aby som ho spustil a potom znova nastavim native, lebo ak nie tak sa mi prehreje a hodi blue screen

a ked nastavim na native tak sa uz potom starat nemusim ? FAN sa bude regulovat sam ? alebo musim rucne nastavovat percenta ?
ked dam native tak mi to automaticky hodi na 50% a vobec sa to nemeni.

native ti automaticky reguluje podla teploty, u mna do 50C je 35% nad 50C je 50% nad 63C je 70% atd

aha dobre dakujem.
dufam ze mi to uz pri hrach nebude robit.
a toto nastavenie zostane aj po restartovani ? alebo musim vzdy nanovo zapnut ten program a nastavit ?

2 RS: mohol by si prisím ťa uploadnúť tvoj *.ini súbor s konfiguráciou pre eeectl?? Díki moc

Scorpion:aj ty mas problemy s taktovanim ?
ved pouzi tento standartny:

Mne sa práve zdá že to "taktovanie" nič nerobí...teda je fakt že v CPU-Z sem-tam vyskočí frekvencia na 2GHz, ale inak nič Tak teda neviem že kde robím chybu...

mne v CPU-Z pri 2,0Ghz ukazuje nejakych 1100Mhz, a pri 1Ghz ukazuje 400Mhz
divne.

jeeeejda, aj to NATIVE vyhadzuje "blue screen".
uz ma to fakt hneva.
RS: pls nemohol by si mi napisat tvoje presne nastavenie ake pouuzivas pri hrani hier (GTA SA atd) ?
dakujem

; This file contains eeectl settings.
;
; ======================================================================================
;
;
; Modified for Eee PC 1000 Series with Intel Atom CPU / Intel 945GSE Chipset
;
;
; ======================================================================================
;
;
; Please note that the default settings are adjusted, sane and sufficient for most users.
; When making changes you should clearly understand what you are doing, otherwise you may
; damage both software and hardware.
;

;
; eeectl has a modular structure, each module has a set of resources.
; Most notable
;
; Modules:
; Core -- eeectl core interface.
; Speed -- FSB speed, PCIE speed and CPU voltage control.
; Temp -- Temperature monitor.
; Fan -- Fan control.
; Backlight -- Backlight brightness control.
;
; Methods:
; Core._quit -- Exit app.
; Core.Alpha -- Load ini file "Alpha".
; Speed._up -- Switch to the nearest upper speed profile.
; Speed._down -- Switcn to the nearest lower speed profile.
; Speed.Alpha -- Switch to the "Alpha" speed profile.
; Fan._native -- Return fan control to the embedded controller.
; Fan._auto -- Enable automatic mode.
; Fan.Numeric -- Set fan speed to "Numeric".
; Backlight._up -- Switch to the nearest upper backlight profile.
; Backlight._down -- Switch to the nearest lower backlight profile.
; Backlight.Alpha -- Switch to the "Alpha" backlight profile.
;
; Icons:
; Core. -- Blank icon
; Speed.FSB -- FSB clock frequency multiplied by Speed.FSBIconMul
; Speed.PCI -- PCI clock frequency
; Fan. -- Current fan speed
; Temp.C -- CPU temperature in celsius
; Temp.F -- CPU temperature in fahrenheit
; Backlight. -- Current backlight brightness intensity.
;


[Settings]
;
; List of modules allowed to save their state.
Core.Save = Fan; Speed;

;
; List of modules to add to system menu.
; List consists of blocks "Name,Mode".
; See the table above for the list of available modules.
; Mode can be embed(module menu items add right to the menu) or popup(module has its own submenu), default is embed.
Core.Menu = Speed,embed; Fan,popup; Backlight,popup; Core;

;
; Hotkeys list
; List consists of blocks "Modifier+Key,Method"
; Modifier can be any combination of a(lt), c(ontrol), s(hift) and w(indows)
; Key can be key name (like "home", "del", "g" or "8") or key code (for example "%1B" for the escape key)
; See the table above for the list of the most useful methods.
Core.Keys = aw+esc,Core._quit; aw+down,Speed._down; aw+up,Speed._up; aw+f3,Backlight._down; aw+f4,Backlight._up; aw+0,Fan._auto; aw+3,Fan.30; aw+5,Fan.50; aw+7,Fan.70;

;
; List of icons to show in the tray.
; List consists of blocks "icon,color".
; See the table above for the list of available icons.
; Color is 24-bit hex value in BGR format, FFFF00 by default.
; ======================================================================================
;
;
; Modified for Eee PC 1000 Series: Removed Speed.FSB (shows wrong value)
;
;
; ======================================================================================
Core.Icon = Temp.C,00FFFF;

;
; Pause between icon changes, msec.
; Set to 0 to disable automatic icon changing.
Core.IconDelay = 5000

;
; Speed profiles list.
; List consists of blocks "FSB,PCIE,Voltage,Name".
; FSB is the real FSB frequency (70MHz stock, 100MHz max), not the rated one which is
; this value multiplied by four, or the CPU one, which is this value multiplied by nine.
; PCIE is PCI Express bus clock frequency.
; Voltage is CPU voltage flag, 0 for Low, 1 for Normal.
; This flag is ignored for all(and even named) intermediate values.
; Name is just what to show in the menu("Suspend" is the special profile to set before entering sleep mode).
; You may omit Name in case you want to hide profile from the menu, however it will still be used as an
; intermediate value.
;
; Note that changing the frequency includes a step-by-step transfer through all intermediate
; values, i.e. if you change the frequency from 70 to 100 MHz and settings contain also 80
; and 95MHz, first the frequency will be changed to 80, then to 95 and only then to 100MHz.
; When comparing, FSB speeds are taken in account first and if they are equal -- PCIE speeds get comapared too.
;
; ======================================================================================
;
;
; Modified for Eee PC 1000 Series: different Values for FSB,PCIE
;
;
; ======================================================================================
Speed.Profiles = 48,166,1,Suspend; 30,166,0,990 MHz; 34,166; 38,166,0,1254 MHz; 42,166; 48,166,1,1585 MHz; 50,166; 52,166,1,1710 MHz; 54,176,1,1890 MHz; 54,187,1,2008 Mhz;
; Pause between steps in described process, msec.
Speed.StepDelay = 500
; Multiplier for the FSB icon. You may set it to 9 to see the CPU speed in the tray instead of the FSB one.
Speed.FSBIconMul = 1

;
; Fan profiles list.
; List consists of blocks "Speed,C_Temp_On,C_Temp_Off".
; Speed is the fan speed (0-100).
; C_Temp_On(used in Automatic mode) is temperature(Celsius) when this profile should be activated.
; C_Temp_Off(used in Automatic mode) is temperature(Celsius) when this profile should be deactivated.
; You may set both temp fileds to 0(or just omit them) if you don't want them to be used in Automatic mode.
Fan.Profiles = 10,50,45; 20,55,50; 30,60,55; 40; 50; 60,65,55; 70; 80,70,65; 90; 100,75,60;

;
; Backlight profiles list.
; List consists of blocks "Name,Value".
; Name is just what to show in the menu.
; Value is the backlight brightness intensity(0-100).
Backlight.Profiles = Lowest,10; Low,30; Medium,50; Bright,70; Ultra bright,100;

[States]
Fan.Mode=0
Fan.Speed=

Speed.Profile=1585 MHz

pri gta som mal vsetko na min
a sysel nizzsie mhz ti ukazuje preto lebo v idle sa cpu automaticky podtaktujea to tym ze zmeni multiplier na nizzsi napr das pretaktovat na 2ghz tak v zatazi mas 12x166mhz teda 2GHZ
a ked nic nerobis tak v idle ti hned hodi 6x166mhz teda 1 GHZ
vola sa to tusim speedstep a baterka ti na ntb dlhsie vydrzi

RS:skusil som to tvoje .INI a musim ti podakovat.
uz mi to neblbne, konecne si mozem naplnno uzit hru bez toho, aby som sa stresoval ze kedy mi to zas vypne

ale nie, uz zas mi to robi.
spravilo mi to pri GTA SA asi po 8 minutach

pardon ze ozivujem staru temu, ale chcem sa ze ako mi prispeje upgrade 2GB k vykonu EEEcka.
lebo grafika zdiala RAMku, tak ma napadlo ze ci by to nezvysilo vykon grafiky kebyze upgradnem ramku z 1gb na 2gb.